2024 Exmark VXS730GKA60400 60" Kawasaki
$13,499.00
Key Features
New/Used New
Availability
In Stock
LocationBusy Corner Buggies LLC
Stock #
VXS730GKA60400
VIN
416257029
Condition
Excellent
Product Features
Dealer Notes
Low-interest financing available.
Description
Features
- Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
- Design Simplicity: Operating a Vertex mower is easy, thanks to the simple, ergonomic design. Key, choke, throttle, height of cut adjustment...they're all right there. Hop on, and you're ready to go.
- Operator Comfort: Designed to place the operator in a position of comfortable control. The wide, open platform offers more room for the operator to adjust their stance, while the ergonomic control panel places all vital controls close for easy reach and operation.
- Cut Quality: All models are equipped with Exmark UltraCut Series 4 side-discharge cutting decks. The decks feature flow-control baffles, anti-scalp rollers, and a rod-style floating deck design for easy deck rake adjustments. The result is a signature cut quality on any turf type.
- Reduced Maintenance: With no in-season grease points, flat-free semi-pneumatic front caster tires, and maintenance-free sealed bearing cutter housings, Vertex S-Series is designed to minimize in-season maintenance and the downtime that goes with it.
- Ease Of Service: These units are easy to service thanks to the tools-free access to the engine and hydro drive components. The reliable single-belt drive system is simple and easy to maintain, and Exmark's patented spherical idler bearings require only annual lubrication.
- Commercial Engine: Choose from a fuel-saving EFI Kohler or carbureted Kawasaki commercial engine. Both engines feature heavy-duty canister-style air filtration systems and pressurized lubrication for maximum durability in daily commercial use.
- Single-Point Height of Cut: The single-point height of cut makes it easy to accurately set deck height without tools. This enables the operator to quickly change cut height by simply raising and lowering the deck.
Equipment
- Starter: Electric
- Steering Control: Twin levers with center fixed reference bar for ease of control forward and reverse
- Front Caster Tires: 13 x 5.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
- Drive Tires: 20x10.0-8 Carlisle Turf Master
- Parking Brake: Lever-actuated bar brake.
- Tractor Frame: Welded, heavy-duty 1.5 in. x 2.5 in. tubular steel.
- Blade Spindles: No maintenance, sealed and nongreasable spindles; 7.75 in. diameter cutter housing with 1.75 in. diameter splined blade driver 1.0 in.-diameter spindle shaft.
- Electrical: 12-volt battery with 15-amp alternator.
- Cup Holder: Yes
- Standard Features: Enhanced Engine Hour Meter
Power Components
- Engine Brand: Kawasaki
- Transmission Speeds: Infinitely Variable
- Transmission Brand: Hydro-Gear
- Engine Model: FX730V
- Engine Displacement: 725
- Speed: Infinitely variable speed selection 0-8.5 mph (x.x kmph) forward, 0-x.x mph (x.x kmph) reverse
- Fuel System: Carbureted
- Engine Series: V-Twin
- Transmission: Hydrostatic
- Engine Speed: 3,750 rpm
- Fuel Capacity: 8-gallon (xx.x-L), single fuel tank on LH side.
- Air Filter: Heavy-duty canister air filtration system
- Drive Description: Two Hydro-Gear 12 cc pumps powering two Parker 14.5 cubic inch motors.
- Fuel Type: Gas Carbureted
- PTO Engagement: Warner 200 ft-lb clutch
- Drive System: HYDRO
- Drive Wheel Release: Allows unit movement without engine running.
- Fuel Indicator: Yes - Float Gauge
- Deck Lift: Single point HOC; with mechanical lift-assist springs.
- Carb Compliant: NO
- Safety Package: Operator Presence Controls (OPC) with safety interlock system indicators
Decks
- Deck Style: Floating Deck
- Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
- Width / Cutting Deck: 60 in.
- Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
- Cutting Heights: 1.5 in. (3.8 cm) to 5.0 in. (12.7 cm) in 0.25 in. (0.64 cm) increments adjustable from operator's platform.
- Blade Tip Speed: Approximately 18,500 fpm.
- Blades: 3 Blades at 20.50 in. Length
Dimensions
- Width: 72.87
- Height: 49.2
- Length: 68.24
- Curb Weight: 978
Vertex S-Series Accessories
- Equipment Cover, Large: Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
- Jack Mount Receiver: Safely access the underside of your zero-turn mower's deck. Used with Exmark's Bulldog jack (p/n 127-6666 not included), attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.
- Jack: Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
- Trash Container: TRASH CONTAINER
- Tire and Wheel Assembly: Tire and Wheel Assembly 20 X 10-8
- Hydro Maintenance Kit: Kit includes: 3 quarts of Exmark® Premium Hydraulic Oil and 1 Hydro Filter
- Light Kit, Strobe: Strobe Light Kit
- Light Kit: Light Kit
- Turf Stiper: STRIPER 60" VERTEX
- Operator Controlled Discharge Lever, Foot (Requires 142-8181): KIT, OCD PEDAL
- Operator Controlled Discharge Gate & Cable Assembly: Operator Controlled Discharge Lever (Foot)
- Operator Controlled Discharge Lever, Hand: KIT, OCD HAND LEVER
- 3-Bushel Bagger: Lightweight and easy to attach, this 3-bushel grass catcher fits most riders, stand-ons and wide-area walk-behinds. Adapter kit required for select models.
- Micro-Mulch System: The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.
Engine
Engine Manufacturer | Kawasaki |
Engine Type | FX730V |
Displacement | 725cc |
General
Transmission | Hydrostatic |
Wheel Size | 20x10.0-8 Carlisle Turf Master |
Fuel Capacity | 8 gal. (xx.x L) |
Deck
Deck Size | 60 in. |
Discharge Type | Side; Optional: Bag, Mulch |